Pleated Fan Floor Lamp
A floor-standing fan floor lamp with a pleated, folding-fan shade in white fabric, set on a slim black alloy pole and a weighted round base. One G9 LED bulb (10W) backlights the fan for a soft uplight glow, with three switchable color temperatures — warm, neutral, and cool white — cycled by a foot pedal. At 71″ tall and 24″ wide, it fits a living room corner, a bedroom reading nook, or an entryway.
Pleated folding-fan shade
White fabric over acrylic ribs spreads 24″ wide, throwing light up and through the pleats.
3 colors, foot-switch
Tap the foot pedal to cycle warm, neutral, and cool white — no reaching down to the cord.
Replaceable G9 LED
One standard G9 bulb you can swap yourself. Runs on AC 110–240V; slim base tucks into corners.
Custom finish or bulk order
Want a different pole finish, shade color, or a project quantity? Email us for options and lead time.
🔍 Tap to enlarge · 24 × 12 × 71″ (61 × 30 × 180 cm)
| Overall size | 24″ W × 12″ D × 71″ H (61 × 30 × 180 cm) |
| Shade | Pleated folding-fan, white fabric over acrylic ribs (~24″ spread) |
| Body & base | Matte-black alloy pole on a weighted round base |
| Light source | 1 × G9 LED bulb, 10W, replaceable (included) |
| Color temperature | Three selectable — warm, neutral, and cool white |
| Switch | In-line foot pedal (on / color-cycle) |
| Voltage | AC 110–240V (use a 120V G9 bulb for North America) |
| Use / location | Indoor, dry locations only |
| Assembly | Tool-free, self-install; plugs into a standard outlet |
- No electrician needed — thread the pole into the base, attach the fan shade, screw in the G9 bulb, and plug in.
- For North America, use a 120V-rated G9 LED bulb (10W or less) as the replacement.
- Place against a wall or in a corner so the open fan throws light upward across the ceiling.
- Keep the fabric shade dry; dust with a soft brush. Indoor, dry-location use only.
- California Proposition 65: may contain chemicals known to California to cause cancer or reproductive harm. See p65warnings.ca.gov.
Is this fan floor lamp bright enough to light a whole room?
With one 10W G9 LED, it gives accent and mood lighting — a soft uplight glow in a living room corner or bedroom, not a primary ceiling light. Pair it with overhead lighting for full-room brightness.
How do I switch between the three light colors?
Tap the foot pedal: the first tap is warm white, then each tap steps to neutral, cool white, and off. It restarts at warm white after being unplugged.
Does it come in other colors or shade finishes?
The standard build is a white pleated fan shade on a matte-black pole and base, in one size. Other pole finishes and shade colors can be quoted for custom or project orders — email us before ordering.
Does it need assembly or an electrician to set up?
No electrician. It assembles tool-free — fit the pole into the round base, attach the fan shade, screw in the G9 bulb, and plug into a standard outlet.
What happens if the LED bulb burns out?
The bulb is a standard replaceable G9 — swap it yourself with any G9 LED (use a 120V bulb in North America). The fixture and wiring are covered by warranty; email support replies within one business day.
Original: $899.00
-70%$899.00
$269.70
Description
A floor-standing fan floor lamp with a pleated, folding-fan shade in white fabric, set on a slim black alloy pole and a weighted round base. One G9 LED bulb (10W) backlights the fan for a soft uplight glow, with three switchable color temperatures — warm, neutral, and cool white — cycled by a foot pedal. At 71″ tall and 24″ wide, it fits a living room corner, a bedroom reading nook, or an entryway.
Pleated folding-fan shade
White fabric over acrylic ribs spreads 24″ wide, throwing light up and through the pleats.
3 colors, foot-switch
Tap the foot pedal to cycle warm, neutral, and cool white — no reaching down to the cord.
Replaceable G9 LED
One standard G9 bulb you can swap yourself. Runs on AC 110–240V; slim base tucks into corners.
Custom finish or bulk order
Want a different pole finish, shade color, or a project quantity? Email us for options and lead time.
🔍 Tap to enlarge · 24 × 12 × 71″ (61 × 30 × 180 cm)
| Overall size | 24″ W × 12″ D × 71″ H (61 × 30 × 180 cm) |
| Shade | Pleated folding-fan, white fabric over acrylic ribs (~24″ spread) |
| Body & base | Matte-black alloy pole on a weighted round base |
| Light source | 1 × G9 LED bulb, 10W, replaceable (included) |
| Color temperature | Three selectable — warm, neutral, and cool white |
| Switch | In-line foot pedal (on / color-cycle) |
| Voltage | AC 110–240V (use a 120V G9 bulb for North America) |
| Use / location | Indoor, dry locations only |
| Assembly | Tool-free, self-install; plugs into a standard outlet |
- No electrician needed — thread the pole into the base, attach the fan shade, screw in the G9 bulb, and plug in.
- For North America, use a 120V-rated G9 LED bulb (10W or less) as the replacement.
- Place against a wall or in a corner so the open fan throws light upward across the ceiling.
- Keep the fabric shade dry; dust with a soft brush. Indoor, dry-location use only.
- California Proposition 65: may contain chemicals known to California to cause cancer or reproductive harm. See p65warnings.ca.gov.
Is this fan floor lamp bright enough to light a whole room?
With one 10W G9 LED, it gives accent and mood lighting — a soft uplight glow in a living room corner or bedroom, not a primary ceiling light. Pair it with overhead lighting for full-room brightness.
How do I switch between the three light colors?
Tap the foot pedal: the first tap is warm white, then each tap steps to neutral, cool white, and off. It restarts at warm white after being unplugged.
Does it come in other colors or shade finishes?
The standard build is a white pleated fan shade on a matte-black pole and base, in one size. Other pole finishes and shade colors can be quoted for custom or project orders — email us before ordering.
Does it need assembly or an electrician to set up?
No electrician. It assembles tool-free — fit the pole into the round base, attach the fan shade, screw in the G9 bulb, and plug into a standard outlet.
What happens if the LED bulb burns out?
The bulb is a standard replaceable G9 — swap it yourself with any G9 LED (use a 120V bulb in North America). The fixture and wiring are covered by warranty; email support replies within one business day.
